How to Clean Your Vape Tank


Cleaning your vape tank is an important aspect of maintaining an optimal vaping experience. Over time, residue from e-liquids can build up inside the tank, affecting the flavour of your vape and potentially causing issues with the device’s performance. Regularly cleaning your vape tank helps ensure a clean and enjoyable vaping experience.

The purpose of this blog post is to provide step-by-step instructions on how to clean a vape tank effectively. By following these instructions, vapers can learn the proper techniques to remove residue, gunk, and lingering flavours from their tanks. This helps improve the flavour quality, extends the lifespan of the tank, and reduces the risk of any potential issues that may arise from a dirty tank.

Understanding the Importance of Cleaning:

Regularly cleaning your vape tank offers several benefits that can greatly enhance your vaping experience and overall satisfaction:

  1. Improved Flavour Quality: A clean vape tank ensures that you’re getting the purest and most accurate flavour from your e-liquids. Built-up residue and lingering flavours can mix with the new flavours, resulting in a muted or off-tasting vape. By regularly cleaning your tank, you can enjoy the true flavours of your favourite e-liquids.
  2. Prolonged Coil Life: A clean tank contributes to the longevity of your coils. When gunk and residue accumulate in the tank, it can clog the coil and reduce its lifespan. Regularly cleaning the tank removes these impurities and allows the coil to function optimally, extending its life and saving you money on replacement coils.
  3. Prevention of Residue Build-up: E-liquids can leave behind residue in the tank, especially if you switch flavours frequently. This residue can accumulate over time and affect the performance of your device. By cleaning the tank regularly, you prevent residue build-up, ensuring smooth and consistent vapour production.

A clean vape tank ultimately contributes to your overall vaping satisfaction. When your tank is clean, you can fully appreciate the flavours of your e-liquids, ensuring a more enjoyable vaping experience. In addition, a clean tank promotes better vapour production and prevents any issues that may arise from a dirty tank, such as leaking or clogging. By maintaining a clean tank, you can maximise the performance of your device and enhance your overall vaping satisfaction.

Guide to Cleaning Your Vape Tank

Disassembling the Vape Tank:

To disassemble the tank components, follow these steps:

  • Drip Tip: Remove the drip tip or mouthpiece from the top of the tank. It may unscrew or pull out, depending on the design.
  • Glass or Plastic Tube: Carefully remove the glass or plastic tube that holds the e-liquid. Some tanks may have a twist-off mechanism, while others may require unscrewing the base to access the tube.
  • Base: Unscrew the base of the tank from the rest of the device. This is where the coil is located.
  • Coil: Depending on the tank, the coil may be screwed into the base or simply rested inside. Take it out gently.

Discarding Remaining E-Liquid:

To safely dispose of any remaining e-liquid in the tank, follow these guidelines:

  • Unscrew the base from the rest of the tank and pour out any remaining e-liquid into a suitable disposal container.
  • If the e-liquid is unused or unexpired, consider transferring it to a proper storage container for future use.
  • Be mindful of local regulations and guidelines regarding the proper disposal of e-liquid, as it may be considered hazardous waste in certain areas.

Rinsing the Tank Components:

To rinse the tank components, follow these steps:

  1. Hold the components under warm running water to flush out any remaining e-liquid.
  2. Gently rotate and swish the components to ensure thorough rinsing.
  3. Pay special attention to hard-to-reach areas and the coil, as these tend to accumulate residue.

Cleaning with Mild Dish Soap:

To clean the tank parts thoroughly, follow these steps:

  1. Prepare a solution of warm water and mild dish soap in a clean container.
  2. Place the disassembled tank components in the soapy solution.
  3. Let the components soak for 15-20 minutes to loosen any stubborn residue.
  4. After soaking, use a soft-bristled brush or toothbrush to gently scrub the components, paying attention to any areas with residue.
  5. Avoid using abrasive cleaners or chemicals that may damage the tank.

Rinse and Dry:

To ensure all soap residue is removed and the tank is thoroughly dry, follow these steps:

  1. Rinse all tank components under clean running water to remove any remaining soap residue.
  2. Inspect each component to ensure they are free from any residue and clean.
  3. After rinsing, leave the components to air dry on a clean towel or paper towel. Ensure they are completely dry before proceeding with reassembly.

Reassembling the Vape Tank:

To reassemble the tank components, follow these steps:

  1. Attach the coil to the base, making sure it is securely in place.
  2. Place the glass or plastic tube back onto the base, aligning it properly.
  3. Screw the base back onto the rest of the tank, ensuring a tight seal but avoiding overtightening.
  4. Finally, attach the drip tip or mouthpiece back onto the top of the tank.

Priming the Coil and Refilling:

To prime a new or cleaned coil and refill the tank with fresh e-liquid, follow these steps:

  1. If using a new coil, apply a few drops of e-liquid directly onto the exposed cotton-wicking material to saturate it. This helps prevent dry hits.
  2. If using a cleaned coil, reattach it to the base and proceed with priming.
  3. Fill the tank with your desired e-liquid, being careful not to overfill or exceed the tank’s capacity.
  4. Allow the coil to sit in the filled tank for a few minutes to ensure proper saturation.
  5. Once the coil is adequately primed, the tank is ready to be reattached to your vaping device, and you can resume vaping.

Following these steps ensures proper cleaning and maintenance of your vape tank, allowing you to enjoy a clean and optimal vaping experience.

Tips for Regular Maintenance

Cleaning Frequency:

The frequency of cleaning your vape tank depends on usage and e-liquid characteristics. Here are some general guidelines to follow:

  1. Light usage: If you use your vape tank infrequently or occasionally, cleaning every 1-2 weeks should be sufficient.
  2. Moderate usage: For regular vapers who use their tank daily, cleaning once a week is recommended.
  3. Heavy usage: If you are a heavy vaper or frequently switch between flavours, consider cleaning every 3-4 days to prevent flavour mixing and residue build-up.

E-liquid characteristics can also impact cleaning frequency. Some e-liquids, especially sweet flavours or high VG content can cause build-up more quickly. If you notice changes in flavour or performance, it may be time to clean the vape tank.

Storage and Protection:

To prevent dust and debris build-up when not in use, consider the following tips:

  1. Store in a cool, dry place: Avoid exposure to direct sunlight or extreme temperatures, as this can negatively impact e-liquid and tank components.
  2. Use protective covers or cases: Consider using a protective cover or case for your tank to prevent damage.
  3. Keep the tank upright: Storing the tank upright helps prevent leaks and keeps the coil and wicking material in good condition.

Coil Replacement:

Replacing the coil periodically helps maintain optimal performance and flavour in your vape tank. Old coils can produce less vapour and have a burnt taste. Here’s why you should replace the coil:

  1. Consistent flavour: Old coils can impact flavour or produce a burnt taste. Replacing the coil ensures that you get the best flavour from your e-liquid.
  2. Vapour production: Old coils may produce less vapour, impacting your overall vaping experience. A new coil ensures satisfying vapour production.
  3. Coil lifespan: Coils have a finite lifespan. Replacing the coil ensures you get the best out of your tank.

A general rule of thumb is to replace the coil every 1-2 weeks or sooner based on usage or changes in flavour and performance. By following these tips, you can maintain a clean tank, prolong the lifespan of the coil, and enjoy a consistently satisfying vaping experience.


Cleaning your vape tank is an important process that you should incorporate into your regular routine of vaping. This will help ensure that your vape tank performs as well as it did the first time you used it and is always ready for use when you need it. It also helps reduce the risk of experiencing issues with your vape, such as minor overflows or gurgling noises when using the device.


Please select your product

You have not added your freebie(s) to the cart.

You can go back and add them now!