Blog Category
In this article...
Picture this: you take a puff from your vape, eagerly anticipating the rich, flavourful vapour, only to be met with a harsh, unpleasant burnt taste. It’s a frustrating experience that many vapers have encountered at some point. In this blog post, we will delve into the phenomenon of experiencing a burnt taste when vaping, exploring the causes behind it and providing insights on how to prevent and overcome this issue. Whether you’re new to vaping or a seasoned enthusiast, understanding the reasons behind a burnt taste can significantly enhance your vaping journey.
The burnt vape taste refers to the unpleasant, charred flavour experienced when vaping. It is characterised by a harsh, acrid taste resembling burnt or charred materials. When inhaling, instead of the desired smooth and flavourful vapour, vapers may encounter a dry, harsh sensation accompanied by a distinct burnt smell.
The burnt vape taste can overpower the intended flavour of the e-liquid, leaving an undesirable aftertaste and significantly diminishing the overall enjoyment of the vaping experience. It is important to address the burnt vape taste promptly to restore the desired flavour profile and ensure a satisfying vaping experience.
The frustration caused by a burnt taste when vaping stems from the discrepancy between expectations and reality, wasted e-liquid, discomfort, uncertainty about the cause, and limited usage.
Running a tank or pod system with low e-liquid levels can lead to a burnt taste while vaping. This occurs because the wick in the coil relies on continuous contact with e-liquid to stay saturated. When the e-liquid level in the tank or pod becomes low or depleted, the wick may not have sufficient e-liquid to stay saturated, resulting in dry hits and a burnt taste.
The importance of keeping the wick saturated cannot be overstated when it comes to avoiding dry hits. The wicking material inside the coil is responsible for absorbing e-liquid and transferring it to the heating element for vaporisation. When the wick is properly saturated, it ensures a consistent flow of e-liquid to the coil, allowing for efficient vapour production and a pleasurable vaping experience.
When the e-liquid levels are low, the wicking material may not be able to absorb enough e-liquid to keep up with the demands of the coil. This causes the wick to dry out, and when the heating element is activated, it ends up burning the dry wick rather than vaporising the e-liquid. This results in an unpleasant burnt taste and can also lead to damage to the coil.
By keeping the wick saturated with e-liquid, you can avoid dry hits and the associated burnt taste. Maintaining adequate e-liquid levels and implementing proper priming techniques will help ensure a smooth and enjoyable vaping experience while preventing damage to the coil.
Using a wattage or temperature setting beyond the recommended range can cause the coil to burn the e-liquid, resulting in a burnt taste and potentially damaging the coil. This occurs because every coil has a specific range of wattages or temperatures within which it is designed to operate optimally. Going beyond this range can lead to the coil heating up too quickly or to excessively high temperatures, causing the e-liquid to vaporise unevenly or burn instead of producing smooth and flavourful vapour.
The recommended wattage or temperature range can usually be found on the coil itself or in the manufacturer’s instructions. It is crucial to pay attention to these specifications and adjust your device’s settings accordingly to match the capabilities of the coil. Here’s why it is important:
To ensure a satisfying and safe vaping experience, it is crucial to adjust your device’s wattage or temperature settings to match the capabilities of the coil. Here are some guidelines to follow:
By adjusting your device’s wattage or temperature settings to match the capabilities of the coil, you can avoid burning the e-liquid, enjoy the optimal flavour and vapour production, and ensure the longevity of your coil and overall device performance. Safety and a great vaping experience go hand in hand when using your device within the recommended settings.
Chain vaping, which involves taking frequent and continuous puffs in quick succession, can lead to insufficient wicking and eventually result in burnt hits.
During chain vaping, the coil may not have enough time to fully re-saturate with e-liquid before each puff. The wicking material in the coil needs time to absorb e-liquid and deliver it to the heating element for vaporisation. When you take successive puffs without allowing sufficient time for the wick to re-saturate, the coil can become dry, leading to a burnt taste.
An old or gunked-up coil can contribute to a burnt taste while vaping. This occurs because the coil’s wicking material becomes clogged with residue, limiting the amount of e-liquid that the coil can absorb, which can lead to overheating and scorching of the remaining e-liquid, producing a burnt taste and harsh throat hit.
Moreover, overheating can cause the cotton wick to burn, further exacerbating the issue with a bad taste that can even transfer to future vape sessions. Thus, it’s essential to replace the coil when it’s reached its end of lifespan, to enjoy optimal performance and flavour quality.
Therefore, it’s crucial to perform regular coil maintenance and replacement to prevent the burnt taste from occurring. Proper maintenance and replacement will help to extend the life of your device and ensure that you enjoy consistent, high-quality flavour with every puff. Here are some important points to keep in mind to ensure that your coil remains in top condition at all times:
Regularly maintaining and replacing your coil is essential to avoid burnt hits and enjoy optimal flavour quality. A burnt taste is indicative of a coil that has reached the end of its lifespan and can impact both your taste and vaping experience. By following a regular maintenance schedule and replacing coils as necessary, you can ensure a long-lasting, enjoyable vaping experience.
Properly priming a new coil is crucial to prevent dry hits and an unpleasant burnt taste when vaping. This process ensures that the coil’s wicking material is thoroughly saturated with e-liquid, allowing for efficient and consistent vapor production. Here’s why it’s important and some recommended priming methods:
Here are some recommended priming methods and techniques:
Remember, regardless of the method you choose, it’s important to give the coil enough time to fully saturate before using the device. By properly priming your new coil using these methods, you can enjoy a smooth and flavourful vaping experience, free from dry hits and burnt taste.
Here are the step-by-step instructions on how to prime a new coil:
By following these steps, you can prime your new coil to ensure proper saturation, prevent dry hits, and prolong the lifespan of your coil.
By monitoring your e-liquid levels and refilling before the tank or pod system runs dry, you can enjoy a consistent and enjoyable vaping experience. This ensures that you get the best possible flavour and vapour production with each puff, without the risk of dry hits, coil deterioration, or build-up.
To monitor your e-liquid level, check your device’s user manual or instructions to see how to access the tank or pod system. Visual inspection of the e-liquid level is typically the easiest way to assess the amount remaining. Refilling before the level gets too low is recommended to avoid interruptions in your vaping experience.
Regularly checking and refilling e-liquid levels can significantly enhance your vaping experience. By avoiding dry hits, prolonging coil lifespan and avoiding build-up, you can ensure optimal flavour, vapour production and longevity of your device.
To ensure optimal performance, it is advisable to check the specifications and recommendations provided by the coil manufacturer or your vaping device’s user manual. Adjust your device settings within the recommended range to achieve the best flavour, vapour production, and overall vaping experience.
By following the recommended wattage or power range for your specific coil, you can avoid dry hits, extend coil longevity, and enjoy the full potential of your e-liquids. Keep in mind that different coils may have different ranges, so it’s essential to double-check and adjust accordingly when using a new coil.
Taking breaks between puffs is a simple yet effective technique to prevent a burnt taste while vaping. When you vape rapidly and don’t allow sufficient time for the wick to saturate, the coil can become dry and burn the wick. This leads to an unpleasant burnt taste and reduces the overall enjoyment of your vape.
To avoid this issue and produce the best possible vaping experience, it’s recommended to take short breaks between puffs. This gives the wick sufficient time to saturate, ensuring that you get a consistent and flavourful hit with every puff.
To maintain optimal flavour and prevent build-up, it is recommended to clean or replace your coils at regular intervals. The frequency may vary depending on factors like coil material, e-liquid composition, and vaping habits. Consult your device’s user manual or the manufacturer’s guidelines for specific instructions on coil maintenance.
By regularly cleaning or replacing coils, you can prevent build-up, maximise flavour, retain vapour production, and prolong the lifespan of your coils. This ensures that you get the best possible vaping experience with every puff.
If you’re experiencing a burnt taste while vaping, especially after ruling out other potential issues like old or worn-out coils and incorrect settings, it’s worth considering the e-liquid you’re using.
Different e-liquids have varying thicknesses and consistencies, and these can impact the wicking performance of your coils. When the wicking performance is inadequate, it can result in the dreaded burnt taste. Adapting to a different e-liquid can help you find a balance between flavour and wicking performance.
Try using e-liquids with different VG/PG ratios. Vegetable Glycerin (VG) is thick and syrupy, while Propylene Glycol (PG) is thinner. A higher VG ratio can result in more vapour production and a smoother hit, but it may also result in slower wicking and reduce the overall wicking performance. On the other hand, a higher PG ratio can lead to stronger flavours and a more significant throat hit but using too much PG can cause harshness and throat irritation.
Experimenting with different e-liquids and ratios can help you find the balance that works best for you and your vaping equipment. By finding the perfect balance between flavour and vapour production, while also ensuring adequate wicking performance, you can avoid a burnt taste and enhance your overall vaping experience.
The burnt vape taste can occur due to various reasons, including insufficient e-liquid in the tank, overheating of the coil, inconsistent wattage or power settings, and old or worn-out coils. To prevent this unpleasant experience and ensure a flavourful vaping experience, proper maintenance, and settings are necessary.
We use cookies to give you the best experience with us. You are free to manage your cookies via your browser settings at any time. Please continue browsing if you are happy with our cookie policy | close